gC 46 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com g rocker t series subminiature rocker switches models available features/benefits ? compact sizemall footprint ? single and double pole models ? pc and panel mounting options available ? rohs compliant typical applications ? telecommunications ? instrumentation ? medical equipment specifications contact rating: q contact material (tx01 models): 3 amps @ 120 v ac or 28 v dc. all other models: 2 amps @ 120 v ac or28 v dc. see page h-50 for additional ratings. electrical life: tx01 models: 60,000 make-and-break cycles at full load. all other models: 30,000 cycles. contact resistance: below 20 m typ. initial @ 2C v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 min. dielectric strength: 1000 vrms min. @ sea level. opera ting tempera ture: C0?oto 85?. solderability : per mil-std-202f method 208d, or eia rs-186e method 9 (1 hour steam aging). note: any models supplied with b, g, p, q or r contact material are rohs compliant. note : specifications and materials listed above are for switches with standard options. for information on specific and custom switches, consult customer service center . materials case: glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (dap), (ul 94v-0) or glass filled nylon 4/6, flame retardant, heat stabilized. actuator: nylon, black standard. bushing: brass, nickel plated. housing: stainless steel. switch support: brass, matte-tin plated. mounting bracket : stainless steel. end contacts: b contact material: copper alloy, with gold plate over nickel plate. q contact material: coin silver, silver plated. see page g-50 for additional contact materials. center contacts & terminals: b contact material: copper alloy, with gold plate over nickel plate. q contact material: copper alloy , silver plated. see page g-53 for additional contact materials. terminal seal: epoxy. hardw are: nut, scr ews & lockwasher: stainless steel. standoff: nylon standard. build-a-switch t o or der , simply select desir ed option fr om each category and place in the appr opriate box. a vailable options ar e shown and described on pages g-47 thr ough g-51. for additional options not shown in catalog, consult customer service center . all models have epoxy terminal seal and ar e compatible with all ottom--ash?cb cleaning methods. switch function t101 sp on-none-on t102 sp off-none-on t103 sp on-off-on t105 sp mom.-off-mom. t107 sp on-off-mom. t201 dp on-none-on t205 dp mom.-off-mom. actuator j1 rocker, .300" wide j6 rocker, .230" wide terminations a right angle, pc thru-hole av vertical right angle, pc thru-hole z solder lug v3 v-bracket contact material b gold p gold, ma tte-tin q silver g gold over silver r gold over silver , matte-tin seal e epoxy actuator color 2 black
g rocker gC 47 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com t series subminiature rocker switches switch function dpdt 2-1,5-4 n/a open 2-3,5-6 on none on mom. off mom. t201 t205 dp spdt spst 2-1 3-1 n/a open n/a 2-3 open on none on on off on mom. off mom. on off mom. off none on t101 t103 t105 t107 t102 sp schematic connected terminals pos. 1 pos. 2 pos. 3 switch function pos. 1 pos. 2 pos. 3 model no. no. poles dpdt spdt part number shown: t101j1zbe2 part number shown: t201j1zbe2 mom. = momentary all models with all options when ordered with g, q or r contact material. terminal nos. for refer ence only t erminal nos. for reference only c&k marking on opposite side c&k marking on opposite side panel mounting panel mounting actuator color
t series subminiature rocker switches actuator pc mounting sp dp actuators available separately , see page g 51- g53. finish: matte. other colors, custom actu- ator markings and legends available, consult customer service center. 2 black actuator color option code j1 rocker, .300 wide a right angle, pc thru-hole z solder lug j6 rocker, .230 wide termina tions sp and dp t101j6abe2 horizontal actuation spdt standar d with all models except t10x with a terminations. standard with t10x model with a terminations. not available with p or r contact material. not available with t102 model. j6 actuator standard only on t10x models with a terminations. actuator gC 48 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com g rocker
t series subminiature rocker switches terminations v3 ver tical mount , v -bracket av vertical right angle, pc thru-hole av vertical right angle, pc thru-hole a right angle, pc thru-hole note: t erminal bend radii and lead-in manufacturing option. note: terminal bend radii and lead-in manufacturing option. t201j1abe2 horizontal actuation dpdt t101j1a vbe2 v ertical actuation spdt t201j1avbe2 vertical actuation dpdt t101j1v3be2 spdt g rocker gC 49 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com
t series subminiature rocker switches terminations v3 vertical mount, v-bracket contact material * note: see technical data section of this catalog for rohs compliant and compatible definitions and specifications. 1 cont acts & terminals: copper alloy, with gold plate over nickel plate. 2 end contacts: coin silver, with gold plate over nickel plate. 3 center cont acts & all terminals: copper alloy , with gold plate over nickel plate. 4 end contacts: coin silver, silver plated. 5 center cont act & all terminals: copper alloy, silver plated. 6 terminals: copper alloy, with matte-tin over nickel plate. note: any models supplied with b, g, p, q & r contact material are rohs compliant. all models with all options when or der ed with g, q, or r contact material. b contact material standard with a, av, v3 terminations. q contact material standar d with c & z terminations. p & r contact materials not available with z terminations. seal e epoxy seal t201j1v3be2 dpdt 0.4 v a max. @ 20 v ac or dc max. tx01 models: 3 amps @ 120 v ac or 28 v dc. all other models: 2 amps @ 120 v ac or 28 v dc. tx01 models: 0.4 v a max @ 20 v ac or dc max. or 3 amps @ 120 v ac or 28 v dc. all other models: 0.4 va max @ 20 v ac or dc max. or 2 amps @ 120 v ac or 28 v dc. ra tings b p q g option code contact material terminal plating low level/ dr y circuit power low level/dr y circuit or power gold 1 matte-tin 6 sil ver 5 gold 3 gold 3 silver 4,5 gold over silver 2,3 r ma tte-tin 6 gC 50 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com g rocker
t series subminiature rocker switches available hardware j1 actuator p art no. 468002263 black material: nylon finish: matte j6 actuator p art no. 468102263 black material: nylon finish: matte note: other colors, custom actuator markings and legends available, consult customer service center. note: additional nuts, scr ews and lockwashers available separately, see technical data section of this catalog. typical as sembly screw p anel thickness stand-off lockwasher nut stand-off length panel mounting hardware for rocker and lever handle switches is available separately. mounting hardware consists of two screws, two nuts, two standoffs and two lockwashers per switch, and is available for panel thicknesses of 1/16, 3/32 and 1/8 inch. see part numbers below. part no. panel thk. standoff length 761101000 1/16 in. (1,59) .295 (7,49) 761102000 3/32 in. (2,38) .264 (6,71) 761103000 1/8 in. (3,18) .233 (5,92) g rocker gC 51 dimensions are shown: inches (mm) specifications and dimensions subject to change www.ck-components.com
|
